« Back to Products
STABILINE® Surge Protective Devices are designed for virtually any commercial or industrial environment where protection of mission critical equipment can be provided for at the service entrance and/or branch panel.
Stabiline DIN Mounted Surge Protection Devices deliver worry-free performance with an innovative and proven technology design. All models provide surge protection against harmful transient voltage and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads.
Stabiline DIN Mounted Surge Protection Devices deliver worry-free performance with an innovative and proven technology design. All models provide surge protection against harmful transient voltage and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads. The DIN1 PLUS series unit is installed/connected in either series of parallel with the line and the equipment to be protected. The DIN1 PLUS contains no line/load sensitive components and therefore can be connected in any orientation.
DIN1 PLUS series units respond reliably and repeatedly in less than 1 nanosecond. The fail-safe design incorporates thermal fuse links, TMOVs and dual Component-Level Fusing (CLF) are standard in each unit. All models include an LED to visually indicate that protection is active. Units are self-contained in rugged plastic enclosures and employ 20mm MOVs as their key suppression elements.
STABILINE® DIN1 Plus Series Din-Rail or Wall Mount Surge Protective Devices for use in Parallel or Series AC or DC single phase, 2-wire plus ground applications.
Please note this product is no longer available for purchase. The following information and resources are for reference only. PT1 Series STABILINE® Transient Voltage Surge Suppressors deliver worry-free performance with an innovative and proven technology design. The tested single-pulse surge current capacity (per mode) meets NEMA recommendations. Sand-packed MOV arrays equally.