Hubodometers can be mounted on a VeederRoot bracket or hub cap. Concentricity of the hubodometer to axel must be within 0.062” (1.6mm). Mounting the 7777 Model and Rite- Trak Series hubodometers begins with inserting the hubodometer mounting stud into the mounting hole and securing with a washer and lock nut. 3. Torque the nut to 18 to 22 lb-ft. (24 to 30 N-m) maximum. See the attached instructions for additional information on properly mounting your hubodometer to your equipment.
Copyright Specialty Product Technologies © 2021. All Rights Reserved
Legal Entity: Dynapar Corporation